Tuesday 24 April 2018

Swimming robot to probe damage at Fukushima nuclear plant

A newly developed robot for underwater investigation at Fukushima reactor moves through the water at a test facility in Yokosuka near Tokyo (AP)
A newly developed robot for underwater investigation at Fukushima reactor moves through the water at a test facility in Yokosuka near Tokyo (AP)

A new swimming robot is set to investigate damage at Japan's Fukushima Dai-Ichi nuclear plant following the March 2011 earthquake and tsunami.

Remote-controlled robots are key to the decades-long decommissioning process for the plant, b ut super-high radiation and structural damage inside the reactors have hampered earlier attempts to inspect areas close to the reactors' cores.

Japanese developers say they plan to send the probe into the primary containment vessel of Unit 3 at Fukushima in July to study the extent of damage and locate parts of melted fuel thought to have fallen to the bottom of the chamber, submerged by highly radioactive water.

The robot, nicknamed the "mini manbo", or little sunfish, is about the size of a loaf of bread. It is equipped with lights, manoeuvres using tail propellers and collects data using two cameras and a dosimeter radiation detector.

During Thursday's demonstration at a test facility near Tokyo, the probe slowly slid down from a rail and moved across the water. A team operated it remotely, with one guiding the robot while another adjusted a cable that transmits data and serves as its lifeline.

Officials hope the probe can swim deep into the reactor to illuminate the area underneath the reactor's core.

Japan hopes to locate and start removing fuel from the reactors after Tokyo's 2020 Olympics.

In earlier operations, snake and scorpion-shaped robots became stuck inside two reactors. The scorpion robot's crawling function failed and it was left inside the plant's Unit 2 containment vessel.

The other, designed for cleaning debris for the "scorpion" probe, was called back after two hours when two of its cameras stopped working after its total radiation exposure reached 1,000 Sievert - a level that would kill a human within seconds. The plan had been to use the robot for 10 hours at an exposure level of 100 Sievert per hour.

The swimming robot shown was co-developed by electronics and energy giant Toshiba and the government's International Research Institute for Nuclear Decommissioning.

Scientists need to know the melted nuclear fuel's exact location and understand structural damage in each of the three wrecked reactors in order to work out the optimum, safest way to remove the fuel.

"The fuel debris will be a challenge," said Dale Klein, a former US Nuclear Regulatory Commission chief, who now serves as an outside adviser to Tokyo Electric Power (Tepco), the plant's operator.

He said it could take six months to a year to obtain necessary data and decide on how to remove the fuel.

"They will have to identify where it is, then they will have to develop capability to remove it. No-one in the world has ever had to remove material like this before. So this is something new and it would have to be done carefully and accurately."

Japanese officials say they want to determine preliminary removal methods this summer and start work in 2021.

The decommissioning technology developers IRID and its partners have designed other basic robots, including a "muscle" arm robot made by Hitachi-GE Nuclear Energy, and a different arm robot made by Mitsubishi Heavy Industries, which are designed to approach the debris from the sides of the reactors.

Tepco is struggling with the plant's decommissioning, which is now expected to cost eight trillion yen (£54 billion), four times earlier estimates. Part of that cost will be included in Japanese utility bills.

The 2011 meltdown forced tens of thousands of nearby residents to evacuate their homes. Many are still unable to return due to high radiation levels.

Press Association

Today's news headlines, directly to your inbox every morning.

Editors Choice

Also in World News